The Stone Texture glaze series flows a little in the firing, settling in the crevices and towards the bottom of a vertical surface.
Therefore, when applied over a textured surface they will produce antique-like variations or a weathered and worn out look on the higher relief areas of the piece.
Glaze chips are shown at left on light and red clays.
Because they move slightly, care should be taken to taper down the glaze application towards the bottom of the piece so that the piece will not stick to kiln shelving during firing. These glazes have a smooth unique stone-like surface when fired over a Cone 04 bisque.
4 These Amaco Glazes are AP Non-Toxic: Code 4. Not Dinnerware Safe. Contains no lead or cadmium bearing ingredients, but passes test for lead and cadmium release.
4 These Amaco Glazes are CAUTION LABELS: Code 4. Not Dinnerware Safe. Contains no lead or cadmium bearing ingredients, but passes test for lead and cadmium release.
20% Off 12 or more.
10% Off 6 or more.
Mix and match, any combination
Discount is applied after check-out
Discontinued by Amaco. Available only while current supplies last.